Fixing LAN Network Issues. If you can access your website using a VPN but encounter issues when trying to access it from your local area network (LAN), it indicates a potential problem with your LAN network configuration. Here are some steps you can take to troubleshoot and resolve the issue:
Check LAN network settings:
Verify that your LAN network settings are correct. Make sure that your LAN devices, including routers, switches, and access points, are properly configured and connected.
Reset your LAN devices:
Sometimes, restarting or resetting your LAN devices can resolve connectivity issues. Power off your modem, router, and any other network devices connected to your LAN. Wait for a few seconds, then power them back on in the correct sequence (usually modem first, then router, and other devices). Allow the devices to boot up completely and establish connections.
Verify IP address and DNS settings:
Ensure that your LAN devices are correctly configured with appropriate IP addresses and DNS settings. Check the IP configuration and DNS settings on your router and ensure they match the recommended settings provided by your internet service provider (ISP). You can usually access these settings through your router’s administration interface.
Disable LAN network firewall or security settings:
Your LAN network’s firewall or security settings might be blocking access to your website. Check the settings on your LAN devices, such as the router or firewall, and temporarily disable any overly restrictive security measures or firewalls. Ensure that the necessary ports and protocols for accessing your website are open and allowed.
Flush DNS cache:
Clear the DNS cache on your LAN devices to ensure they have the updated DNS information. Instructions for clearing the DNS cache may vary depending on the operating system of your devices. You can search online for instructions specific to your devices’ operating systems.
Check LAN device compatibility:
Verify that your LAN devices, such as routers or access points, are compatible with the required protocols and configurations for accessing your website. Check for any firmware updates or compatibility issues that could be causing the problem.
Contact your network administrator or ISP:
If you have limited knowledge or access to the LAN network configuration, it’s recommended to contact your network administrator or internet service provider (ISP). Explain the issue and provide details about your LAN network setup. They should be able to assist you in troubleshooting and resolving the connectivity problem.
By following these steps and working through the possible causes, you should be able to resolve the issue and access your website successfully from your LAN network.
